Allon
®
User Manual
DDT-063-000 Rev C Belmont Medical Technologies
Page 9 of 106
circulatory support must be thoroughly understood before using this
product.
11. Read the entire manual before attempting to activate the system.
12. Completion of the training program prior to using the Allon
®
system is
mandatory.
13. The repair, calibration, and servicing of the Allon
®
system should be
performed only by Belmont Medical Technologies or authorized agents
trained by Belmont Medical Technologies.
14. Prevent any thermal isolation, such as a pillow or other items,
between the ThermoWrap
®
and the patient's body.
15. Do not apply heating/cooling to lower extremities during aortic cross
clamping. Thermal injury may occur if heating/cooling is applied to
ischemic limbs.
16. Wraps should not be placed over transdermal patches.
17. Wrap should not come in contact with open wounds.
18. Do not touch the ribbon cable behind the display and the patient
simultaneously.
Precautions
1. Follow the warning notes listed in the various sections of this manual.
2. Only trained personnel, familiar with all system operating procedures
and certified only by Belmont Medical Technologies or authorized
agents of Belmont Medical Technologies are allowed to use the
Allon
®
system. All hospital personnel using the Allon
®
system must
complete the Allon
®
training program.
3. If moisture or leaks are discovered in the connecting hose and/or
Wrap, turn off the Allon
®
device, disconnect the power cable from its
power source, and correct the problem before proceeding.
4. The desired set-point temperature should be fixed only as prescribed
by and under the order of a physician.
5. The default setting is intended to maintain Normothermia. The system
provides the physician with the option of selecting a body temperature
in the range of 30°C to 40°C (86°F-104°F).
