12
Operation
GB
Robin Petrol Engine
Stopping the engine
1. Set the Speed control lever to the low speed position and
allow engine to idle for 2-3 minutes.
2. Turn the engine switch to the
O
position.
3. Close the fuel cock.
Starting the engine
1. Turn the engine stop switch to the
I
position.
2. Open the fuel cock.
3. Set the Speed control lever 1/3 of the way towards the high
speed
position.
4. Adjust the choke lever. If the engine is warm, open the choke
lever halfway, or keep it fully open. If the engine is cold, close
the choke lever fully.
5. Pull back the handle of the recoil starter slowly until
resistance is felt, Return the recoil to it’s original position
and repull swiftly.
6. Do not pull the recoil starter rope fully out.
7. After starting the engine, gradually open the choke until fully
open.
8. If the engine fails to fi re after several attempts, refer to the Troubleshooting Guide.
Recoil Starter
Stop Switch
Fuel Cock
Speed Control Lever
Choke Lever
Lifting, Transportation And Towing
Transportation
Machine ready for transportation
1. Lashing strap
GB
Lifting/Towing
Machine ready for lifting
1. Lifting hook
2. Shock absorbers (rubber elements)
Always secure the machine fi rmly during all transportation. Place lashing band in a U shape around the
bottom plate and secure both front and rear.
WARNING
All lifting equipment must be dimensioned in conformance with current regulations. Ensure before lifting
that the shock absorbers (2) are securely fi xed and undamaged.
CAUTION
Use only the frame lifting hook (1) to lift the machine.
CAUTION
Never walk or stand underneath a hoisted machine
WARNING
