9
Never remain under or in the immediate vicinity of the machine when it is lifted by a crane. Only use marked
lifting points. Always make sure that all lifting devices are dimensioned for the weight of the products.
WARNING
Always take extreme care when driving the machine on slopes. Always drive straight up and down on
slopes.Do not exceed the maximum gradability of the machine according to the instruction book. Stay clear
of machine when operating on a slope or in a trench.
WARNING
Do not operate the machine in poorly ventilated spaces. There is a risk of carbon monoxide poisoning.
WARNING
Keep your feet well clear of themachine.
WARNING
Before starting read instruction book and make your self familiar with the machine and make sure that:
WARNING
Petrol has an extremely low fl ashpoint and can be explosive in certain situations. Do not smoke. Make sure
that worksite ventilation is good.
WARNING
GB
Use the machine only for the purpose for which it is intended. Make sure you know how to stop the machine quickly in the event of an
emergency situation.
Safety Instructions (For All Light Products)
Filling with fuel (Gasoline/diesel)
Keep away from all hot or spark-generating objects when handling fuel. Wait until the machine has cooled before fi lling the tank. Fill the
tank at least 3 metres away from where you intend to use the machine. Avoid spilling petrol, diesel or oil on the ground. Protect your
hands from contact with petrol, diesel and oil.
Open the tank cap slowly to release any overpressure that might exist in the tank.
Do not overfi ll the tank. Inspect the machine for fuel leakage regularly.
Do not use a machine that is leaking fuel.
Starting the machine
• All handles are free from grease, oil and dirt.
• The machine does not show any obviousfaults.
• All protective devices are securely fastened in their places.
• All control levers in “neutral” position.
Start the machine according to the instructionbook.
Operation
Do not touch the engine, the exhaust pipe or the eccentric element of the machine. They gets very hot during operation and can cause
burn injuries.
Do not touch V-belts or rotating parts during operation.
Parking
Park the machine on ground as level and fi rm as possible. Before leaving machine:
• Apply the parking brake.
•
Shut off the engine and pull the ignition keyout.
Loading/Unloading
Maintenance
Maintenance work must only be carried out by skilled personnel. Keep unauthorized persons away from the machine. Do not carry out
maintenance work while the machine is moving or the engine is running.
Repair
Never use a machine that is damaged. Qualifi ed repair work requires trained personnel, please contact your nearest authorized work-
shop.
Extinguishing fi res
If there is a fi re in or on the machine, it is best to use an ABE-class fi re extinguisher. However, a BE-class CO2 extinguisher is also suit-
able.
