Belden 934 815-001 Technical Manual Download Page 71

Page: 71 / 72

Accessories

Technical manual LioN-Link BusHead EtherNet/IP™

Release 1.1 04/2016

11 Accessories

Item number

Description

EtherNet/IP

0985 342 100/… M

Connection cable for EtherNet/IP, assembled on both sides with M12
connectors, straight, 4-pin, D-coded

0985 342 102/… M

Connection cable for EtherNet/IP, assembled on one side with an M12
connector, straight, 4-pin, D-coded

0985 342 104/… M

Connection cable for EtherNet/IP, assembled on both sides with M12
connectors, straight, 4-pin, D-coded, and straight RJ-45 plug

LioN Link lines

0935 253 103/… M

Connection cable for LioN Link line, assembled on both sides with M12
connectors, straight, 5-pin, A-coded, and M12 socket, straight, 5-pin,
A-coded

0935 253 104/… M

Connection cable for LioN Link line, assembled on one side with an
M12 connector, straight, 5-pin, A-coded

0935 253 105/… M

Connection cable for LioN Link line, assembled on one side with an
M12 socket, straight, 5-pin, A-coded

0935 253 106/… M

Connection cable for LioN Link line, assembled on one side with an
M12 socket, angled, 5-pin, A-coded

0935 253 107/… M

Connection cable for LioN Link line, assembled on one side with an
M12 connector, angled, 5-pin, A-coded

0935 253 108/… M

Connection cable for LioN Link line, assembled on both sides with M12
connectors, angled, 5-pin, A-coded, and M12 socket, angled, 5-pin, A-
coded

Table 23: Connection cables for data transfer

Item number

Description

RKT 5-228/… M

Connection cable for power supply, assembled on one side with an
M12 socket, straight, 5-pin, A-coded

RKWT 5-228/… M

Connection cable for power supply, assembled on one side with an
M12 socket, angled, 5-pin, A-coded

RKT 5-226/… P89

Connection cable suitable for intermediate power supply, assembled
on one side with an M12 socket, straight, 5-pin, contacts 1 and 3 wired,
A-coded

Table 24: Connection cables for the power supply

Summary of Contents for 934 815-001









































































Search results

Summary of Contents for 934 815-001

Reviews:

Related manuals for 934 815-001

Brands by name

Popular brands

Belden 934 815-001, Technical Manual

Search results

Summary of Contents for 934 815-001

Reviews:

Related manuals for 934 815-001

Brands by name

Popular brands