Assembly and wiring
22
4.4 Port assignments
Technical manual LioN-Link BusHead EtherNet/IP™
Release 1.1 04/2016
4.4.8
T-distributors for intermediate power feed
An easy way of providing an intermediate power feed to an I/O module is the
use of the 0906 UTP 104 T-distributor. The internal wiring of the T-distributor
is shown in the following drawing. The T-distributor is bolted onto the input of
an I/O module (M12 connector).
Figure 6: T-distributors for intermediate power feed
4.4.9
Voltage drop and intermediate power feed
To calculate the expected voltage drop and location for the intermediate
power feed, Belden provides a calculation table as an XLS file in its download
area:
http://www.beldensolutions.com/en/Service/download_center/
