QUICKFIRE®
Signature
®
Series
1MANUL826
Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
65
Maintenance
Routine Procedures
Daily
•
Start every wash
day with a “Test Wash” to ensure proper operation of all equipment.
•
Inspect the component for clogged nozzles. This can best
be done while running the “Test
Wash” in the morning. Nozzles can be cleaned by removing the nozzle bodies and tapping
or inserting a thin wire into the nozzle opening.
•
Check operation to insure uniform foam is being applied where applicable. This is best be
checked while running the “Test Wash” in the morning.
•
Check overall performance for any abnormalities on the first few vehicles washed each day.
•
Check for water, chemical, or air leaks after the equipment is turned OFF.
•
Check all hydraulic hose connections for leaks.
Weekly
•
Hose down the component and surrounding area. This will remove the majority of the dirt
and other debris that builds up throughout the week.
Monthly
•
Wash component frame. See Powder Coat Cleaning Procedure.
•
Check cleaning material for wear. Replace if necessary.
