Beko CLEARPOINT 3eco M010 Original Installation And Operating Manual Download

Page: 50 / 60

13. Disposal

13.1 Warning

NOTICE

Improper disposal!

Improper disposal of components and assemblies, operating and auxiliary materials and cleaning
agents may cause environmental hazards.
• All components and assemblies, operating and auxiliary materials and cleaning agents

must be disposed of appropriately and according to regional statutory specifications and

provisions.

• In case of doubt, consult regional disposal companies before disposal.

13.2 Disposal of components

The following requirements must be met before disposal:

Preconditions

The product and accessories have been taken out of service and dismantled.

The product and the accessories are cleaned and freed from existing media residues.

Description

Dispose all material regarding the national guidelines and regulations.

CLEARPOINT

eco

coalescing filter

Installation and operation instructions

50 | 60

Summary of Contents for CLEARPOINT 3eco M010





























































Search results

Summary of Contents for CLEARPOINT 3eco M010

Reviews:

Related manuals for CLEARPOINT 3eco M010

Brands by name

Popular brands

Beko CLEARPOINT 3eco M010, Original Installation And Operating Manual

Search results

Summary of Contents for CLEARPOINT 3eco M010

Reviews:

Related manuals for CLEARPOINT 3eco M010

Brands by name

Popular brands