12. When using the
BEKOMAT
®
, it must be reconnected.
For further information, see the enclosed installation and
operating instructions for the
BEKOMAT
®
.
12.
12.
13. Slowly open the shut-off valves upstream and
downstream of the filter or relevant system section.
10.7 Leak test
The leak test is a non-destructive testing method and is used to prove the leak tightness of vacuum and overpressurized
systems. The leak test can be completed in different ways.
BEKO
TECHNOLOGIES does not make any recommendations
here. The operator of the compressed gas system is responsible for selecting the testing process, and testing should be
completed in accordance with applicable standards and directives (e.g. DIN EN 1779).
Installation and operation instructions
CLEARPOINT
®
3
eco
coalescing filter
45 | 60
