1. General
1.1 Contact
Manufacturer
Service and tools
BEKO
TECHNOLOGIES GmbH
Im Taubental 7 | 41468 Neuss
Tel. + 49 2131 988 - 1000
www.beko-technologies.com
BEKO
TECHNOLOGIES, Corp.
900 Great Southwest Pkwy SW
Atlanta GA, Tel. +1 (800) 235-6797
E-mail: [email protected]
www.bekousa.com
INFORMATION
Country specific manufacturer representation
i
The contact to the country-specific manufacturer's representative can be found in the address
mirror on the back or can be established via the contact form on the manufacturer's website.
1.2 Installation information and operating manual
INFORMATION
Copyright protection
i
The content of this installation and operating manual, in the form of text, images, photos,
drawings, diagrams, and other illustrations, is copyright protected by the manufacturer. This
applies in particular to copies, translations, microfilm versions, and saving and processing this
document in electronic systems.
Publication date
Revision version
Reason for change
Scope of change
10/31/2018
00_03
Change to standards and
directives
Initial creation
9/23/2020
01_00
Change of technical data
Changes
This installation and operating manual, referred to in the following as the manual, must be legible and must be stored
near the product at all times.
The manual must be included if the product is sold or handed over to another party.
NOTE
Observe the manual!
This manual contains all basic information required to safely operate the product, and operators
must read the manual before carrying out all work. Otherwise hazards could occur for personnel
or materials, and functional or operating disruptions could occur.
1.3 Additional valid documents
This manual describes all steps required to install and operate the
CLEARPOINT
®
3
eco
coalescing filter.
Further information on installing and operating accessories is provided in the following installation and operating
manuals:
•
BEKOMAT
®
3x
•
CLEARPOINT
®
differential pressure gauge
CLEARPOINT
®
3
eco
coalescing filter
Installation and operation instructions
4 | 60