Beko BEKOMAT 16 CO, Original Installation And Operation Manual

Page: 44 / 60

10.3.3 Visual inspection
During the visual inspection, check all components for mechanical damage and corrosion. Replace damaged components
immediately.
10.3.4 Leakage test
The leakage test is a non-destructive test method and is used to prove leak tightness in vacuum and overpressure
systems. The leakage test can be carried out in different ways. BEKO TECHNOLOGIES GmbH does not make a
specific recommendation here. The company operating the compressed gas system is responsible for the selection
and specification of the test method to be used, which should be executed in accordance with valid standards and
regulations (e.g. DIN EN 1779).
BEKOMAT
®
16 CO Original installation and operation manual
44 | 60