Beko BEKOMAT 16 CO Original Installation And Operation Manual Download Page 24 | Manualshive

Page: 24 / 60

background image

7. Electrical installation

7.1 Warning notices

DANGER

Use of incorrect spare parts, accessories or materials!

The use of incorrect spare parts, accessories or materials, as well as auxiliary and operating

materials, may result in death or serious injury. Malfunction and device failure as well as

material damage can occur.
• For all work, only use undamaged original parts, auxiliary and operating materials which

are specified by the manufacturer.

• Use only the approved materials and suitable tools for the respective purpose and make

sure that they are in proper working order.

DANGER

Electric voltage!

There is a danger of death or serious injuries as well as malfunction and device failure

following contact with components which are in contact with electric voltage.
• Only carry out installation, maintenance and repair work on the product and accessories

when they have been disconnected and secured against being switched back on again.

• Set up a safety area around the working area during all installation, maintenance and

repair work.

• For installation of the device, adhere to all applicable regulations (e.g. VDE 0100 / IEC

60364/ ATEX).

• Connect the protective conductor (earth connection) according to regulations.

WARNING

Insufficient qualification!

Insufficient qualification of the personnel carrying out work on the product and accessories

can lead to accidents, personal injury and damage to property as well as impair operation.
• All work on the product and the accessories may only be carried out by skilled technical

personnel - electrical engineering.

CAUTION

Inappropriate electrical installation!

Inappropriate electrical installation of the product and the accessories can lead to personal

injury and damage to property as well as impair operation.
•

Check all plug-type connections for a correct fit.

• Avoid stumbling hazard through appropriate cable routing.

• Avoid mechanical load on the cables through appropriate cable routing.

BEKOMAT

®

16 CO

Original installation and operation manual

24 | 60

«
...
22
23
24
25
26
...
»

Summary of Contents for BEKOMAT 16 CO





























































Reviews:

No comments

Related manuals for BEKOMAT 16 CO

Brand: Baileigh Industrial Pages: 40

Brand: Bartscher Pages: 28

Brand: Bartscher Pages: 13

Brand: IBEX Pages: 10

Brand: M-system Pages: 12

Brand: Cadex Pages: 300

Brand: CAMAG Pages: 40

Brand: Nektar Pages: 3

Brand: Eaton Pages: 5

Brand: Youkey Pages: 86

Brand: Wacker Neuson Pages: 62

Brand: Gardner Bender Pages: 8

Brand: NARIKA Pages: 2

Brand: Garelick Pages: 2

Brand: Garelick Pages: 2

Brand: Latham Pages: 4

Brand: SafeWaze Pages: 23

Brand: Raven Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands