1. Description
2. Operation
2.1 Controls
2.2 Displays
3. Applications
3.1 Flow transmitter loops
3.2 Resetting the total display to zero
3.3 Remote indication
4. Installation
4.1 Location
4.2 EMC
4.3 Installation procedure
4.4 Scale card
5. Configuration and Calibration
5.1 Calibration structure
5.2 Accessing configuration & calibration
functions.
5.3 Summary of configuration
functions.
5.4 Rate totaliser function
5.5 Display resolution
5.6 Display update time
5.7 Upper display
5.8 Lower display
5.9 Position of decimal points
5.10 Calibration of rate display using an
external current source.
5.11 Calibration of rate display using internal
reference.
5.12 Clear grand total
5.13 Timebase
5.14 Function of
P
push button
5.15 Total scale factor
5.16 Clip off
5.17 Local reset of total & grand total
displays.
5.18 Security code
5.19 Reset to factory defaults
5.20 Over-range
6. Lineariser
6.1 Calibration using external current
source.
6.1.1
Example, Adding break-points
to a new Rate Totaliser
6.2 Calibration using internal reference
6.2.1
Example, Adding break-points
to a new Rate Totaliser
6.3 Error messages
6.4 Under and over-range
6.5 Default configuration
7. Calibration Examples
7.1 Using an external current source
7.2 Using the internal reference
8. Maintenance
8.1 Fault finding during commissioning
8.2 Fault finding after commissioning
8.3 Servicing
8.4 Routine maintenance
8.5 Guarantee
8.6 Customer comments
9.Accessories
9.1 Scale card
9.2 Tag information
9.3 Alarms
9.3.1
Solid state output
9.3.2
Configuration and adjustment
9.3.3
Alarm enable
9.3.4
Type of alarm
9.3.5
Setpoint adjustment
9.3.6
Alarm function
9.3.7
Alarm output status
9.3.8
Hysteresis
9.3.9
Alarm delay
9.3.10 Alarm silence time
9.3.11 Flash display when alarm
occurs.
9.3.12 Access setpoint
9.3.13 Adjusting alarm setpoints
from display mode.
9.4 Display backlight
9.4.1
Loop powered
9.4.2
Separately powered
22
CONTENTS
The BA558E is CE marked to show compliance with the European EMC Directive 2004/108/EC
