5.2
Mouse with guide rail and retraction mechanism
The mouse is used for clamping of the trouser parts or skirt parts, in
order to prevent them from sliding.
The guide rail 3 is flexible and must be adjusted to the contour of the
sewing part.
Caution: Risk of Injury !
Do not reach into the mouse when it is open.
Insert sewing part
–
Place the sewing part between the mouse plate 2 and the
clamping arm 1.
–
Press shut the mouse.
During the sewing operation, the mouse is drawn along the guide
rail 3 until the opening of the clamping arm 1 is actuated by a limit
switch.
Then, the mouse is drawn back by the retraction mechanism 4 until
the adjustable limit stop 5 is contacted.
12
3
2
1
7
6
5
4
Summary of Contents for 1281/5-1
Page 39: ...35 1 ...
