-
Freely programmable parameters for
“Differential lower feed (optional)”, “Upper feed
(optional)”, “Roll-out Device”, “Puller”, “Machine
Parameters”,
“Global Parameters”, “Program Sequences”
-
Input and Output Tests
-
Test routine for stepper motors
-
20 Program Memory Capacity
-
up to 7 seam programs per program storage space
–
Vertical cutter with suction device for overseaming and serging in
a work step.
–
Programmable chain cutting device with suctioning.
–
Adjustable blow nozzles in the table top for supporting the sewing
material feed, mechanical regulation of the blow strength by
means of adjusting knob, duration of table blowing is
programmable.
–
Positioning table with mouse and retraction device for the
workpiece;
for uniform workpiece guidance and higher productivity.
–
Special sewing equipment for trouser side seams with side seam
pockets and slant pockets.
–
Narrow gauge parts including narrow sewing foot for problem-free
feed/ sewing of the pocket openings.
–
Automatic contour control through programmable puller.
–
Height-adjustable rack, infinitely variable from 850 mm up to 1200
mm.
–
Automatic fullness distribution through stepper motor controlled
upper and lower feed (optional).
Within a seam program, the fullness of the upper and lower feed
can be programmed at the operating panel by means of 3 freely
selectable segments.
User-friendly adjustment option for fullness in a segment by
means of one control each.
–
Integrated destacking device.
–
Manual destacking by means of the shortcut key.
1.3
Technical Data
Machine Head:
Pegasus EXT 3216-03/233-K 5x5-KH-021A
Type of stitch:
401, 515, 516
Number of needles:
1 or 2
Needle system:
B27
Needle thickness:
Nm 80 to Nm 110
Type of hook:
Looper crosswise to feeding direction
Serging looper
Yarn:
see table in Chapter 4.2
Speed:
6,500 min
-1
Speed at delivery:
6,500 min
-1
Stitch length:
min.
0.5 mm
max.
3.5 mm
Seam width:
10 mm
Optional
8 - 12 mm
Workpiece:
Light weight to medium weight
Operating pressure:
6 bar
Air consumption:
20 NL per working cycle
4
Summary of Contents for 1281/5-1
Page 39: ...35 1 ...
