8) With the right hand, grasp the trouser parts to be sewed such that
the middle finger is below the lower trouser part, the index finger is
between the two and the thumb is on the upper trouser part.
9) With pedal “-1” “backwards”, the contour guide moves forward.
10) Should a correction be needed, the contour guide can be moved
back with the reset button.
Once the trouser parts have been corrected, the contour guide can
once again be moved forward with the “backwards” pedal.
11) Step on forward pedal.
The automatic sewing operation starts.
12) The transport puller is lowered and transports the workpiece.
- At the seam end, the roll-out device is lowered in order to
secure chain separation and prevent the trouser parts from sliding.
- The completely sewed trouser parts are destacked.
15
1
Summary of Contents for 1281/5-1
Page 39: ...35 1 ...
