6.4.5.2
Machine parameters
–
Tap the symbol.
The display changes to the machine parameters.
–
Select the desired parameter with the arrow keys.
–
Tap the symbol “
E
” in order to adopt the selection.
–
Changing the value.
–
Tap the symbol “
P
” in order to save the selection.
Parameter 30:
Adjusting the main speed
Parameter 31:
Manual sewing on/ off
Parameter 32:
Length of time during which table blowing
remains switched on
Parameter 33:
Number of stitches before start of sewing is followed
by
automatic start
Parameter 34:
Number of stitches until the contour guide is
lowered
Parameter 35:
Number of stitches until the contour guide
moves in sideways
Parameter 36:
Number of stitches until the transport unit
is lowered
Parameter 37:
Start mode for contour control
0 = front right
1 = front left
2 = rear right
3 = rear left
Parameter 60:
Soft-start speed
Parameter 61:
Switching on or switching off the soft-start
Parameter 77:
Switching on or switching off the auto-start
Parameter 78:
Number of stitches before the auto-start begins
Parameter 120:
Sewing foot lift in the seam
Parameter 121:
Sewing foot lift at seam start
40
Summary of Contents for 1281/5-1
Page 39: ...35 1 ...
