3.3
Program Stop
The safety system of 1281/5-1 foresees the following options for
immediate stoppage in case of faulty operation, needle breakage etc.:
–
Press the program stop switch 2 at the operating panel.
Ongoing work steps at the sewing unit are immediately aborted.
–
Turn main switch 1 in anti-clockwise direction.
The sewing unit is powered off immediately;
all the movements at the sewing unit stop immediately.
3.4
Renewed setting in motion after program stop
Caution: Risk of Injury!
Switch off the main switch.
Repair the fault only when the sewing unit is switched off.
Renewed setting in motion of the machine is allowed only after the
fault has been repaired.
–
Switch on the main switch 1 (turn in clockwise direction).
–
Unlock the program stop switch.
The control unit loads the machine program.
The start screen appears on the display screen of the operating
panel.
The sewing unit is once again ready for operation.
7
1
2
Summary of Contents for 1281/5-1
Page 39: ...35 1 ...
