Beisler 1281/5-1 Operating Instructions Manual Download

Page: 50 / 62

Checking the outputs

–

Tap the symbol for the outputs.
The display changes to Outputs.

–

Tap the symbol “Y 1”.
The display appears inverted
and the output is switched on at the same time.

–

Tap the symbol “Y 1” once again.
The output is returned to its original position.

–

Tap the symbol.
The subsequently selected output is automatically switched
on/off.

Output element

Switch

Designation

Y01

Sewing foot up/ down

Y02

Thread tension lift

Y03

Contour guide up/ down

Y04

Stacker off / on

Y05

Roll-out device up/ down

Y06

Transport unit up/ down

Y07

Contour guide forward / backward

Y08

Contour guide blowing on

Y09

Move contour guide sideways

Y10

Differential lower feed on / off

Y11

Upper feed on / off

Y12

Warp thread separator off / on

Y13

Table blowing off / on

Y14

Dirt suctioning off / on

Y15

Puller up/ down

Y16

Mouse retracted

Summary of Contents for 1281/5-1































































Search results

Summary of Contents for 1281/5-1

Reviews:

Related manuals for 1281/5-1

Brands by name

Popular brands

Beisler 1281/5-1, Operating Instructions Manual

Search results

Summary of Contents for 1281/5-1

Reviews:

Related manuals for 1281/5-1

Brands by name

Popular brands