5.7
Stacker
The finished sewing parts are destacked on the flip stacker 2.
The destacked and clamped sewing parts can be removed by
actuating the foot switch 1.
The triggering of the stacker is done by means of a control impulse.
The pneumatic functions are shown in the pneumatic circuit diagram.
Caution: Risk of Injury !
Do not reach into the operating range of the flip stacker while the
stacking operation is on.
Manual destacking
–
Press button 3 on the operating panel.
A destacking operation is performed.
Removal of destacked parts
–
Actuate foot switch 1 and hold it in that position.
–
Remove the destacked parts.
20
3
2
1
Summary of Contents for 1281/5-1
Page 39: ...35 1 ...
