Behncke Control 1.3, Operating Manual

Page: 12 / 60

Control 1.3 Swimming Pool Control Unit
Safety
10

The system must not be operated without the protective housings provided on the individual
components
2.6.3 Compliance with the Degree of Protection
After carrying out work on the BEHNCKE Control 1.3, moisture may penetrate into the device if the housing
or individual cable glands are not closed properly, ensuring that there is a reliable seal. This can lead to
damage or destruction of the control unit or result in malfunctions.

Ensure that there is a reliable seal after carrying out any work on the device.
Dangers due to Structural Modifications and Spare Parts
Structural modifications can affect the operational safety. The control unit must therefore only be rebuilt and
modified in consultation with the manufacturer. No components must be removed, in particular safety
devices.
Only BEHNCKE spare parts and accessories must be used.
Any accessories must not endanger the safety of the system.
Safety Measures at the Installation Location
The control unit must be mounted securely on the wall, in a control cabinet or on a mounting plate and is
not suitable for use in constant sunlight.
Make sure that the operating temperature of 40°C is not exceeded.
Operate the control unit only when all safety devices are fully functional.
The control unit or the surrounding area may be damaged if this information is not observed.
No explosive atmosphere is permitted in the installation area.
The installation area must not be colder than 5°C during operation and when carrying out maintenance,
commissioning, cleaning and repair work.
CAUTION!
Check the control unit and connections for visible damage and to ensure they are
functioning at least once a week .
Disconnect the control unit from the power supply in the case of visible damage and
consult a qualified electrician.