Behncke Control 1.3, Operating Manual, Page: 20 / 60

Control 1.3 Swimming Pool Control Unit
Transport, Packaging and Storage
18
Transport, Packaging and Storage
Safety Instructions for Transport
Unauthorised transport
NOTE!
Damage caused by improper transport
Substantial property damage may occur in the case of improper transport.

Proceed carefully when unloading packages, with deliveries and with internal
transport and observe the symbols on the packaging.

Only use the designated attachment points.

Remove packaging only just before the installation

Transport the control unit only with suitable tools and equipment
Transport Inspections
Check the delivery immediately upon receipt for completeness and transport damage
Proceed as follows in the case of outwardly visible transport damage:

Do not accept the delivery or only under reservation.

Note the extent of the damage on the transport documents or on the delivery note of the transport
company and produce photographic evidence.

Initiate a complaint.
Register a complaint for any defect as soon as it is detected. Claims for damage can only
be made within the applicable periods for complaints.
Transport / Storage
The appropriate specialists must release the connections to the power supply before transport.
The control unit is delivered loose without a plug and wiring.
Important!
Secure the components supplied individually against transport damage. Store the control
unit only in covered, frost-proof areas with a non-aggressive and non-explosive
atmosphere.
Packaging
Remove and recycle packaging.