Behncke Control 1.3, Operating Manual

Page: 44 / 60

Control 1.3 Swimming Pool Control Unit
Faults
42
the supply lines
Temperature sensor error The measured temperature values are outside of
the logic limits stored in the control unit. Please
check the line and the temperature sensor for
damage.
Lack of water in the overflow tank The overflow tank is almost empty (HE2 has no
contact with water) so there is a risk of the pump
running dry. Please check the fill valve.
Flow switch No flow is registered via the flow switch. There is
a risk of the pump running dry. Please check the
pump and the flow switch.
No filter cleaning by the Badutronic The Badutronic has carried out no filter cleaning
within the defined time. Please check the settings
and the Badutronic.
Filter cleaning cancelled due to lack of water The filter cleaning has been cancelled due to a
lack of water.
Filter cleaning cancelled on flow switch The filter cleaning has been cancelled on the flow
switch due to there being no flow.
Max. fill time reached The fill valve is activated for a bit longer than the
maximum permissible fill time. Please check the
pool for any leaks and the set values.
Max. daily fill time reached The fill valve is activated for longer in the day than
the maximum permissible daily fill time. Please
check the pool for any leaks and the set values.
Overfilling (HE6) The hang-in electrode HE6 registers that the
overflow tank is completely full and is overflowing.
Please check the position of the HE6 in the tank
and the settings.
Substance “X” empty
The empty status of substance X is registered via
the empty status sensors. Please check the
empty status and replace the substance with a
new one.
Swimming pool temperature outside of the
limits
The swimming pool sensor is defective or not
connected.
Please check time
Please set the time in the “General” menu.