BEHLMAN BL10000 Series, User'S Manual And Technical Reference Manual

Page: 45 / 59

C-5
CILL COMMANDS EXPLANATION
Fail
F07ACS0(DEV): CONFIDENCE TEST FAILURE
<cr><lf><eos>
IST <cr><lf><eos> Instructs AC Power Supply to perform internal self test. The STA
command transmits the message. The AC Power Supply responds with
one of the following:
Pass
<sp><cr><lf><eos>
Fail
F07ACSO(DEV): BIT TEST FAILURE
(-PROM CHECKSUM FAULT *
-RAM FAULT
-AC SUPPLY HARD FAULT *
<cr><lf><eos>
STA <cr><lf><eos> Status. Prepares AC Power Supply for a response transmission. Clears
error condition if one exists. The following response messages and
conditions exclude confidence and internal self test.
RESPONSE: Status OK
<sp><cr><lf><eos>
Device error messages
F07ACSO(DEV):BIT TEST FAILURE
<description consisting of up to 60 characters><cr><lf><eos>
TMA error messages All begin with:
F07ACSO (MOD):
This message is followed by one explanatory message from the
following text:
ILLEGAL NOUN
AC Power Supply does not recognize illegal noun.
ILLEGAL NOUN MODIFIER
AC Power Supply does not recognize illegal noun modifier.
ILLEGAL OPCODE
AC Power Supply does not recognize illegal opcode.
ILLEGAL VALUE
Entered value lies outside upper and lower limits.
NO SETUP
Close command received but setup not programmed.
Example: F07ACS00(MOD): NO SETUP <cr><lf><eos>