BEHLMAN BL10000 Series, User'S Manual And Technical Reference Manual

Page: 39 / 59

7B REV. C
B-8
Talk address the BL Source to enable response:
<space><cr><lf>:Positive response indicating status is OK.
F/07ACS/0/0(MOD) NO SETUP <cr><lf>:Negative response indicating error condition.
(Negative response would only occur if invalid or no setup string had been transmitted prior to close
command).
2. EXAMPLE: Setup a dual range BL Source to output 3/0 V @4/0/0 Hz.
Transmit setup command to request status response:
FNC ACS :CH /0 SET VOLT 3 /0 SET FREQ 4 /0 /0 Hz.
Transmit status command to request status response:
STA <cr><lf>
Talk address the BL Source to enable response:
<space><cr><lf>:Positive response indicating status is OK.
3. EXAMPLE: Setup a dual range BL Source to output 115 V on high range @50Hz, and read back
what the actual voltage, current and frequency being output is set at.
Transmit setup command
FNC ACS :CH /0 SET VOLT 115 SET FREQ 5 /0 SET BLT1 <cr><lf>
Transmit status command to request status response:
STA <cr><lf>
Talk address the BL Source to enable response:
<space><cr><lf>:Positive response indicating status is OK.
Transmit output relay close command:
CLS :CH /0 <cr><lf>
Transmit status command to request status response:
STA <cr><lf>
Talk address the BL Source to enable response:
<space><cr><lf>:Postive response indicating status is OK.
Transmit fetch volt command:
FTH VOLT <cr><lf>
Talk address the BL Source to enable response:
115./0 <cr><lf>
Transmit fetch current command:
FTH CURR <cr><lf>
Talk address the BL Source to enable response:
5.2 <cr><lf>
Transmit fetch frequency command:
FTH FREQ <cr><lf>
Talk address the BL Source to enable response:
5/0./0 <cr><lf>