Beer Grill AG
Beer Grill GmbH
Allmendstrasse 7
Tel. +41 56 618 7800
Körnerstrasse 14 a
Tel. +49 71 61 659 876
CH
– 5612 Villmergen,
Switzerland
Fax +41 56 618 7849
D
– 79539 Lörrach,
Germany
Fax +49 71 61 659 879
www.beergrill.com
Assembly-Programming-Instructions_Cold-Rack_e_05-10-2018
Page 26
3.3 Status displays and error messages
Ver. 1.11
Message
Cause
Measure
Decimal point
Assigned controller is switched off.
F90
Data transmission error, controller not
found.
Check the interface cabling. Check the address.
PAE
→
L--
→
L0
must be identical to
L1
. The correct ST BUS
address must always be set on the display first via
L1
, as the
controller can no longer be accessed if this error message is shown.
The controller may also be de-energised.
F9c
Another appliance has the same address
as this satellite display.
Change the address, first disconnect the ST bus (pin 1).
(For procedure, see
F90
).
CrC
Internal flash error display.
Repair the display.
EP
Error in the parameter memory.
Check all parameters.
