Beer Grill AG
Beer Grill GmbH
Allmendstrasse 7
Tel. +41 56 618 7800
Körnerstrasse 14 a
Tel. +49 71 61 659 876
CH
– 5612 Villmergen,
Switzerland
Fax +41 56 618 7849
D
– 79539 Lörrach,
Germany
Fax +49 71 61 659 879
www.beergrill.com
Assembly-Programming-Instructions_Cold-Rack_e_05-10-2018
Page 6
1.7 Possible installation of the control panel for the installation variant
For ready-to-connect refrigeration appliances, the control panel is mounted under the
cooling tank on the side of the compressor unit. In the case of centrally cooled appliances,
the control system (including the connector plug) is mounted flat under the showcase tank.
The display is enclosed separately.
Each control system consists of the operating panel (display) and the power electronics.
The operating panel is connected to the power electronics via a 2-m ST bus cable.
The operating panel is built for installation in a control panel, front-side stainless steel
panelling.
External dimensions
125 x 60 mm
Panel mounting cutout
102.2 x 52.5 mm, see drawing
Installation depth
22 mm (without bus mating connector) with plug approx. 50 mm
