Beckhoff EL34 Series Documentation Download Page 281

Page: 281 / 295

Appendix

EL34xx

281

Version: 1.5

Fig. 186: Change dialog

In this example in Fig.

Change dialog

, an EL3201-0000-

0017

was found, while an EL3201-0000-

0016

was

configured. In this case the configuration can be adapted with the

Copy Before

button. The

Extended

Information

checkbox must be set in order to display the revision.

Changing the ESI slave identifier

The ESI/EEPROM identifier can be updated as follows under TwinCAT:

• Trouble-free EtherCAT communication must be established with the slave.

• The state of the slave is irrelevant.

• Right-clicking on the slave in the online display opens the

EEPROM Update

dialog, Fig.

EEPROM

Update

Fig. 187: EEPROM Update

The new ESI description is selected in the following dialog, see Fig.

Selecting the new ESI.

The checkbox

Show Hidden Devices

also displays older, normally hidden versions of a slave.

Summary of Contents for EL34 Series








































































































































































































































































































Search results

Summary of Contents for EL34 Series

Reviews:

Related manuals for EL34 Series

Brands by name

Popular brands

Beckhoff EL34 Series, Documentation

Search results

Summary of Contents for EL34 Series

Reviews:

Related manuals for EL34 Series

Brands by name

Popular brands