manualshive.com logo in svg

Beckhoff EL34 Series, Documentation

The Beckhoff EL34 Series offers comprehensive documentation and user manuals, available for free download from manualshive.com. Easily access detailed instructions and technical specifications for an optimal user experience. Equip yourself with the essential knowledge to make the most of this exceptional product.

Share
Download
background image

Appendix

EL34xx

279

Version: 1.5

Simplified update by bundle firmware

The update using so-called 

bundle firmware 

is more convenient: in this case the controller firmware and the

ESI description are combined in a *.efw file; during the update both the firmware and the ESI are changed in
the terminal. For this to happen it is necessary

• for the firmware to be in a packed format: recognizable by the file name, which also contains the

revision number, e.g. ELxxxx-xxxx_REV0016_SW01.efw

• for password=1 to be entered in the download dialog. If password=0 (default setting) only the firmware

update is carried out, without an ESI update.

• for the device to support this function. The function usually cannot be retrofitted; it is a component of

many new developments from year of manufacture 2016.

Following the update, its success should be verified

• ESI/Revision: e.g. by means of an online scan in TwinCAT ConfigMode/FreeRun – this is a convenient

way to determine the revision

• Firmware: e.g. by looking in the online CoE of the device

NOTE

Risk of damage to the device!

Note the following when downloading new device files 

• Firmware downloads to an EtherCAT device must not be interrupted
• Flawless EtherCAT communication must be ensured. CRC errors or LostFrames must be avoided.
• The power supply must adequately dimensioned. The signal level must meet the specification.

In the event of malfunctions during the update process the EtherCAT device may become unusable and re-
quire re-commissioning by the manufacturer.

8.4.1

Device description ESI file/XML

NOTE

Attention regarding update of the ESI description/EEPROM

Some slaves have stored calibration and configuration data from the production in the EEPROM. These are
irretrievably overwritten during an update.

The ESI device description is stored locally on the slave and loaded on start-up. Each device description has
a unique identifier consisting of slave name (9 characters/digits) and a revision number (4 digits). Each slave
configured in the System Manager shows its identifier in the EtherCAT tab:

Fig. 183: Device identifier consisting of name EL3204-0000 and revision -0016

Summary of Contents for EL34 Series








































































































































































































































































































Reviews:

No comments

Related manuals for EL34 Series

EC Line EC-AM-102-58 User Manual preview
EC-AM-102-58
Brand: EC Line Pages: 10
Bittium Mx Rugged B User Manual preview
Mx Rugged B
Brand: Bittium Pages: 43
GE D20 Installation And Operation Manual preview
D20
Brand: GE Pages: 132
VeriFone QX1000 Specifications preview
QX1000
Brand: VeriFone Pages: 2
Boundless ADDS 4000 User Manual preview
ADDS 4000
Brand: Boundless Pages: 61
Intralot OHIO Manual preview
OHIO
Brand: Intralot Pages: 44
Datafox ZK-MasterIV Manual preview
ZK-MasterIV
Brand: Datafox Pages: 160
E-Pos E-Touch Integrated User Manual preview
E-Touch Integrated
Brand: E-Pos Pages: 26
Welcat GTX-100 User Manual preview
GTX-100
Brand: Welcat Pages: 171
Label i.FeedGood-M Technical Manual preview
i.FeedGood-M
Brand: Label Pages: 16
Holtkamp Chip card terminal Operating Instruction preview
Chip card terminal
Brand: Holtkamp Pages: 16
NCR FastLane SelfServ 7358-K112 Instructions Manual preview
FastLane SelfServ 7358-K112
Brand: NCR Pages: 39
EBN Technology XPOS85-5W-D525 User Manual preview
XPOS85-5W-D525
Brand: EBN Technology Pages: 48
Partner C10-1R Quick Start Manual preview
C10-1R
Brand: Partner Pages: 2
Canton Spectral BRA 3 Operating Instructions Manual preview
Spectral BRA 3
Brand: Canton Pages: 104
datacap systems DC Direct Ingenico Desk/3500 Stand-Alone Quick Reference Manual preview
DC Direct Ingenico Desk/3500 Stand-Alone
Brand: datacap systems Pages: 2
Soehnle 3025 Operation Manual preview
3025
Brand: Soehnle Pages: 116
Verizon tx240g Quick Reference Manual preview
tx240g
Brand: Verizon Pages: 4

Brands by name

Popular brands

Load more brands