Bearcat BC-2016/CRC, Instruction Manual

Page: 20 / 95

20
2016
7
CRUISE CONTROL
(Optional Equipment)
ON: Turns the power on for the cruise control.
SET/DEC: Sets the desired speed. You must be in forward, stepping on the
accelerator pedal, and moving above 200FPM.
NOTE: this switch must be off while starting the engine!
8
MEET LINE
TOGGLE: As you approach the line where you are going to close the gates,
leave the Master switch ON, now toggle the Meet Line switch once to close
the gates, back up to get the next truck, as you come back forward to the
start line the CRC system will automatically re-open the gates.
9
MASTER
ON: Opens all the selected chip box gates. When the master switch is
selected the CRC system will total distance covered.
10
LEFT BOX Manual Gate Operation (Optional)
ON: Selects gates to open with MASTER.
OFF: Closes gate.
11
RIGHT BOX Manual Gate Operation (Optional)
ON: Selects gates to open with MASTER.
OFF: Closes gate.
12
GATES (Taper Cut from left)
Shifting (left) switch to the right you can close gates in sequence.
Shifting (left) switch to the left you can open gates in sequence.
13
GATES (Taper Cut from right)
Shifting (right) switch to the left you can close gates in sequence.
Shifting (right) switch to the right you can open gates in sequence.
14
LEFT BELT CONTROL
OFF: Belts off.
MSTR: Auto belt control when MASTER switch is ON.
AUTO: Auto belt control.
15
RIGHT BELT CONTROL
OFF: Belts off.
MSTR: Auto belt control when MASTER switch is ON.
AUTO: Auto belt control.
16
LEFT (FRONT) AUGER
OFF: Augers off.
MSTR: Auto auger control when MASTER switch is ON.
AUTO: Auto auger control.
17
RIGHT (REAR) AUGER
OFF: Augers off.
MSTR: Auto auger control when MASTER switch is ON.
AUTO: Auto auger control.
18
MANUAL LEFT BELT & AUGER
UP: Manually runs the left belt.
DOWN: Manually runs left auger.