Bearcat BC-2016/CRC, Instruction Manual

Page: 19 / 95

19
Description
CONSOLE
1
FWD-REV.
FWD: (Forward) The hydrostatic drive system will move the chip spreader
forward.
NEU: (Neutral) The hydrostatic drive system will not operation.
REV: (Reverse) The hydrostatic drive system will move the chip spreader
reverse.
NOTE: this switch must be off while starting the engine!
2
HITCH
OPEN: Used to open the hitch.
CLOSED: Used to close the hitch.
3
HITCH LIFT
(Optional Equipment)
UP: Moves the hitch up.
DOWN: Moves the hitch down.
4
STALL POT
CW: Increases engine RPM before the chip spreader starts to move.
CCW: Decreases engine RPM before the chip spreader starts to move.
RANGE: Start range approximately 1050RPM to 1550RPM.
5
MAX SPEED
Sets the maximum travel speed when the throttle is fully depressed.
6
HORN
PUSH: Press the button to activate the horn.