Bearcat BC-2016/CRC, Instruction Manual

Page: 17 / 95

17
Description
CONTROLS
DASH PANEL
1
Pre-Heat
When starting the diesel engine, turn key one position CW & wait until this
light is out, than proceed to start engine.
2
4 x 4
Four Wheel Drive, (Optional Equipment) switch will engage and dis-engage
the rear axle by using a drive-line disconnect. A load on the drive train can
inhibit the shifter from operating. Rocking the back and forth gently may
help slack the load and permit shifting.
3
TURN SIGNAL
LEFT: Position enables the left front and rear directional lamps to flash.
CENTER: Directional lamps are off.
RIGHT: Position enables the right front and rear directional lamps to flash.
4
EMERGENCY FLASHER
Turns on emergency flashers so all four directional lights will be flashing.
5
LEFT TURN LAMP
Left hand turn signal indicator.
6
PARK BRAKE
PULL OUT: Releases the air pressure to the brake actuators to apply the
spring actuated parking brakes.
PUSH IN: Will apply air pressure to the parking brake actuators to release
the parking brakes.
ALWAYS APPLY PARKING BRAKES BEFORE LEAVING THE OPERATOR SEAT!