Bearcat BC-2016/CRC, Instruction Manual, Page: 36 / 95

36
2016
Initial Checkout of Machine
Checkout
1. Make sure all fluid levels are adequate.
STANDARD SYNTHETIC OPTION
Engine Shell Rotella 15w-40 AMSOIL DME 15w-40
Engine Coolant Prima Tech Universal Green (AMSOIL ANT Biodegradable
available)
Hydraulic Tellus T100 AMSOIL HVJ ISO 68
Transfer Case Shell Spirax S4 TXM AMSOIL ATH 5W-30
Brake Master Cylinder Rando HD46 Rando HD46
Front Axle (differential & hubs) AMSOIL SVO 75-140 AMSOIL SVO 75-140
2 X 4 Rear Axle Hubs Shell Spirax S4 TXM AMSOIL SVO 75-140
4 X 4 Rear Axle Differential Shell Spirax S4 TXM AMSOIL SVO 75-140
4 X 4 Rear Axle Gear Box AFT Dextron III/Mercon AMSOIL ATF
Cam Gear Box AMSOIL RCO 460 AMSOIL RCO 460
Fuel Tank Diesel #2 Diesel #2
2. Engine
d. With Engine Off, check belts, tension and wear. Pay special
attention to crank pulley as belt slippage can polish and wear if
belt is excessively worn.
e. Intake Air Filter. (Dust from dirty chip can require daily
replacement) DO NOT BLOW FILTER CLEAN. Inspect all air filter
intake rubber connections down to turbo.
Dust collecting at seams or clamp
locations can indicate possible leak.
f. Check and drain the fuel water
separator for moisture.
3. Inspect air and hydraulic hoses.
a. Check for loose or leaking fittings
on hoses as well as chaffing or
cracks.
4. Conveyor Belts
a. At the rear tail pulley, Insure the belt is at approximate center of
pulley.