Bearcat BC-2016/CRC, Instruction Manual

Page: 54 / 95

54
2016
Optional 4 x 4
The optional rear drive axle provides additional traction for pulling
heavy loads up steep grades. Like the Transfer Case, the shifter to
engage or disengage the rear axle is operated by an air cylinder. The air
cylinder operates a driveline disconnect. The splines on the disconnect
have to line up to engage. On the Dash, switch on 4 x 4 and move the
machine slowly in FWD or REV until you hear a clunk or its indicated
on the dash. It is possible for the splines to stay misaligned even while
moving back and forth. In this case, move forward in a tight turn to force
the two drive axles to move at slightly different speeds to change the
alignment of the splines.