Bearcat BC-2016/CRC, Instruction Manual

Page: 18 / 95

18
2016
7
ACC. POWER
12Vdc accessory power: This is a standard 12Vdc accessory socket with a
maximum 3 amps current draw.
8
IGNITION
Chip spreader engine start and ignition system. On the Console, the FWD-
REV must be in NEU (Neutral) and the Cruise Control must be OFF to start.
9
RIGHT TURN LAMP
Right hand turn signal indicator.
10
LOW/LOCK
ON: Locks the hydrostatic drive motor in full displacement, (max. speed
is about 60% ≈ 1050FPM (320MPM) High range / 650FPM (200MPM)
Low range. This allows you to run in High range but have a slower more
controllable speed range for chipping.
OFF: Drive system acts as normal, can reach maximum speeds.
11
TRANSFER-CASE
Switch operates an air cylinder that shifts the Transfer Case. Use finesse
when shifting between ranges and never shift while moving. Shift to N
(neutral) before shifting into the next range. Check neutral by the indicator
light on the Display and by trying to drive the machine. A load on the drive
train can inhibit the shifter from operating. Rocking the back and forth
gently may help slack the load and permit shifting.
LO: (Low range).
N: (Neutral).
HI: (High range).
12
BEACON
Turns amber warning beacon on and off.
13
WORK LIGHTS
ON: Working lights, front, side & rear.
OFF: Turns work lights off.
14
HEADLIGHTS
ON: Turns headlights, tail lights, and clearance lights on.
OFF: Turns lights off.
15
DISPLAY
This computer display, is used to display chip spreader functions, set-up
and some engine parameters