BE&SCO Betamax 20, Manual

Page: 50 / 80

46
Wedge Press Maintenance
Precautions:
• Unplug electrical power before any repair.
• Allow press to cool down for 30 minutes before repairing.
Part Replacement:
• Replace the Cam Rollers every 1500 hours of machine operation if grooves appear on wheel surface.
• Replace Bottom Plate Bronze Bushings every 1500 hours of machine operation time.
Introduction:
Greasing and replacing parts in your Wedge Press are easy to do. Grease keeps the parts in
the Wedge Press moving smoothly and reduces the causes of premature wear. When parts
wear down, they need to be replaced in order for the machine to operate in top condition or at
all. Ignoring maintenance like greasing or part replacement will eventually ruin your machine
and void your warranty. This section will tell you how to care for your Wedge Press.
Maintenance Materials:
1. Grease Gun
2. Hi Temp Grease
Item Description QTY Part Number
1 Grease Gun 1 911213016
2 Hi Temp Grease 1 911211003
1. Grease the Cam and Cam Rollers wheel sur-
face weekly. Open bottom plate. Inside are the
Gear motor, Cam Rollers, and Cams.
2. Through the Cam Rollers Grease Point,
Grease the Cam Rollers twice a week.