18
3) Wall Mounting Orientation
There are two mounting points at the back of the
terminal (as shown, shaded, in the below image).
The distance (from centre to centre) between the
mounting points is 10 cm. To mount the terminal
vertically on a wall, sit the two included screws with
4mm remaining out of the wall. Adjust this depth till
the terminal hangs securely on the screws.
10cm
NOTE
Vertical (wall) mounting orientation is required to
maintain IP53 rain protection.
Optional through-wall
Right angled adapters are optionally fitted to the
external antenna connectors to allow the routing
of cables through a wall. A “clean” installation free
of any visible cabling can be achieved with the use
of right angled connectors .
SMA Adaptor (GPS) TNC Adaptor (GSPS)
<60°
MOUTING
SCREWS
~4mm
Summary of Contents for Oceana 400
Page 1: ...Terra 400 User Manual ...
Page 27: ...28 Physical Dimensions TR400 OC400 190mm 100mm 65mm 53mm 240mm ...
Page 30: ......