Beam Oceana 400, User Manual

Page: 9 / 31

10
This device has been designed to operate with
antennas ISD710 AT1595-82, ISD715/ISD720
AT1595-83/ISD700 and having a maximum gain
of 6dBi. Antennas having a gain greater than 6dBi
are strictly prohibited for use with this device.
To reduce potential radio interference to other
users, the BEAM antenna type and its gain has
been designed so that the equivalent isotropically
radiated power (EIRP) is not more than that
required for successful communication.
WARNING
Changes or modifications not expressly
approved by BEAM Communications could
void the terminals warranty.
Terra 400 and Oceana 400
FCC Information
This equipment has been tested and found
to comply with the limits for a Class B digital
devices, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna
• Increase the separation between the
equipment and receiver
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.