Terra400 & Oceana400 - Installation & User Manual
15
Installation Procedure
Installing the TR400/OC400 Terminal
Install the components in the following order.
More detailed instructions can be found in the
sections following.
1.
Install the external antenna
2.
SIM installation
3.
Wall mounting orientation
4.
Rear connector bay
5.
Connect POTS/RJ11 interface
6.
USB port connection
7.
Connect power to terminal
8.
Configuration settings
1) Antenna Connection
The two external antenna connectors can be
found in the cavity at the top of the TR400/
OC400 Terminal. There are two RF connections
required, the Satellite TNC – Female Connector
and GPS SMA-Female connector.
1.
Refer to the antennas installation guide
for antenna mounting and location
requirements.
2.
Connect the antenna cable labelled “GPS”
to the antenna connector labelled “GPS”
via the SMA connector
3.
Connect the antenna cable labelled
“Inmarsat” to the antenna connector labelled
“ISAT” via the SMA connector.
4.
Connect the GPS-SMA (F) cable end to the
TR400/OC400’s SMA connector
5.
Connect the TNC (F) antenna cable end to
the TR400/OC400’s satellite connector
Warning
To avoid sparking if a short circuit is present, turn
OFF power to the terminal BEFORE connecting
antenna cables.
Anntena Connection Diagram for TR400
Fixed/Directional Antenna (Passive)
5
4
3
2
TNC
SMA
SMA
SMA
Satellite
Antenna
Cable
GPS
Antenna
Cable
THIS SIDE UP
Summary of Contents for Oceana 400
Page 1: ...Terra 400 User Manual ...
Page 27: ...28 Physical Dimensions TR400 OC400 190mm 100mm 65mm 53mm 240mm ...
Page 30: ......