Beam Oceana 400, User Manual

Page: 24 / 31

Terra400 & Oceana400 - Installation & User Manual 25
Types of Tones on RJ11/POTS
TYPE OF TONE SOUND DESCRIPTION
Dial Tone Continuous tone Telephone ready for use
Progress Tone Continuous short beep,
with 3 second interval
Number has been dialled but call has yet to connect.
Unavailable Tone Beeping tone (engaged) Phone is not registered, or no signal. Calls cannot be made
SIM PIN Required Alternating low and lower
tones (1 sec intervals)
A SIM pin is required to be entered
SIM PUK Required Alternating low and lower
tones (2 sec intervals)
A PUK code is required to be entered
Phone off-hook Fast ascending tone,
repeating.
Phone has been left offhook for > 15 seconds and is not in a
call.
Error Codes
When the signal LED is cycling between GREEN, YELLOW, and RED:
CALL LED MESSAGE LED DESCRIPTION/ERROR CODE
GREEN GREEN SIM pin required
GREEN OFF Insert SIM card
OFF GREEN PUK code required
RED
RED System Error
RED
OFF GPS antenna power error
OFF
RED SAT antenna power error
RED
GREEN SIM locked. Contact Service Provider
GREEN
RED Wrong SIM Card type. Contact Service Provider
Special Modes of Operation
Firmware Upgrade Mode - In firmware upgrade mode all LED’s will flash RED.
Transceiver (USB Bridge) Mode - In this mode all LED’s will flash GREEN.
Using voicemail
You will be able to access voicemail messages if your
service provider has enabled voicemail. Your Terminal
automatically checks for voicemails shortly after it has
been switched on and connected to the network. It
will also send you voicemails that arrive while you are
connected to the network.
The Message LED will indicate (flashing green or
yellow) if you have a new voicemail.
To listen to voicemails dial from the RJ11/POTS phone
the short code 570, or the full international number
00 870 772 001 899. Follow the spoken instructions.
You can also specify another short code to access
voicemail by enabling the Call Processing section
of the Falcon application.
The default language for voicemail is English,
but your service provider may have enabled your
voicemail in your chosen language.
If you wish to change the voicemail language,
follow the spoken instructions or contact your
service provider.
Using SMS
You will be able to access Short Message Service if
your service provider has enabled.
The Message LED will indicate (flashing red or
yellow) if you have SMS messages.
You can read, send, and delete SMS messages by
using the Falcon application.