BEA WebLogic Server User Manual Download Page 145

Page: 145 / 294

Management and Monitoring

BEA WebLogic Adapter for SAP User’s Guide

7-27

Locate the following section:

<m:MIGRATEREPO

xmlns:m="urn:schemas-iwaysoftware-com:jul2003:ibse:config" version="">

<m:repositorysetting>

<m:rname>oracle</m:rname>

<m:rconn>String</m:rconn>

<m:rdriver>String</m:rdriver>

<m:ruser>String</m:ruser>

<m:rpwd>String</m:rpwd>

</m:repositorysetting>

<m:servicename>String</m:servicename>

</m:MIGRATEREPO>

For the <m:rconn> tag, replace the String placeholder with the repository URL
where you want to migrate your existing iBSE repository.

For example, the Oracle repository URL has the following format:

jdbc:oracle:thin:@[host]:[port]:[sid]

For the <m:rdriver> tag, replace the String placeholder with the location of your
Oracle driver.

Note:

This is an optional tag. If you do not specify a value, the default Oracle JDBC

driver is used.

For the <m:ruser> tag, replace the String placeholder with a valid user name to
access the Oracle repository.

For the <m:rpwd> tag, replace the String placeholder with a valid password to
access the Oracle repository.

10.

Perform one of the following migration options.

If you want to migrate a

single

Web service from the current iBSE repository, enter the

Web service name in the <m:servicename> tag, for example:

<m:servicename>Service1</m:servicename>

If you want to migrate

multiple

Web services from the current iBSE repository,

duplicate the <m:servicename> tag for each Web service, for example:

<m:servicename>Service1</m:servicename>

<m:servicename>Service2</m:servicename>

If you want to migrate

all

Web services from the current iBSE repository, remove the

<m:servicename> tag.

11.

From the SOAP menu, select

Send request to server

Your iBSE repository and the Web services you specified migrate to the new Oracle
repository URL that you specified.

Summary of Contents for WebLogic Server







































































































































































































































































































Search results

Summary of Contents for WebLogic Server

Reviews:

Related manuals for WebLogic Server

Brands by name

Popular brands

BEA WebLogic Server, User Manual

Search results

Summary of Contents for WebLogic Server

Reviews:

Related manuals for WebLogic Server

Brands by name

Popular brands