Be Cool All Aboard, User Manual

Page: 42 / 88

EN
42
belt safe guider. (Fig 8d)
NOTE:
• If in doubt, please consult either the child restraint
manufacturer or retailer.
Forward facing Group II.III (15-36kg Child) :
Vehicle 3 point belt
Car seat is adjusted to Position 1.
Have your child sit down in the child seat.
Seat your child in the carseat, and child’s back, shoul-
ders and haunch lean to carseat. Pull out the harness,
Make sure the belt is worn through under the armrest
of the car seat, the shoulder strap across the handrail
above, and the shoulder strap cross the headrest side
belt safe guider. (Fig9a.9b)
NOTE:
• Tighten the vehicle seat belt by pulling on the
diagonal seat belt section
• Please adjust headrest height according to the
height of child’s height. Please refer to 9c.
• If in doubt, please consult either the child restraint
manufacturer or retailer.
Removing the cover
First remove 5 point harness system.
Taken the fabric cover edge from the shell. From the
edge of the shell can taken all fabric cover from the
shell.(Fig 10a.10b)
Remove the headrest cover.(Fig 10c)
To install the cover, please reverse the above steps.
NOTE:
• Fabric cover can uninstall , but suggest do not
always uninstall it. If you uninstall the fabric cover,
please make sure install as original structure.
the safety and maintenance information listed in the
instructions and on the care labels.
9
10
IM 2086.00 ALL ABOARD bo.indd 42 8/1/19 11:18