background image

1. This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to Regulation

No.44,04 series of amendments for general use in vehicles fitted with

ISOFIX anchorages systems.

2. It will fit vehicles with position approved as ISOFIX positions (as

detailed in the vehicle handbook), depending on the category of the

child seat and of the fixture.

3. The mass group and the ISOFIX size class for which this device is

intended is: Group 1 (9-18kg) and ISOFIX size class B1.

4. The child car restraint can also be installed with a 3-point safety belt,

however always in combination with the adjusted support leg. And it

can only be installed on forward facing seats equipped with an

automatic 3-point safety belt approved in accordance with ECE R16 or

other equivalents standar that comply with SABS 1080.

Unimark Distributors CC, P.O.Box 912-1095,Silverton,0127

Tel:0128041793

Fax:0128041795

www.safewaybabies.co.za

[email protected]

Notice

This product has been approved according to the strictest European

safety standards (ECE R 44/04) and is suitable for Group I (9-18KG).

Group I (9-18kg)

Quality Guarantee

Created with Passion,Designed for Safety

SMART SPORT Isofix

.

ISOFIX anchorage installation
3-point-belt installation

.

Summary of Contents for SMART SPORT Isofix









Reviews: