Be Cool All Aboard, User Manual

Page: 38 / 88

EN
38
Press adjuster button (fig 2c 1);At the same time to pull
out two shoulder strap (fig 2c 2) please don’t pull the
shoulder. release a long position of five point safety as
far as possible. (FIG. 2c)
Please adjust the product belt according to the height
of the baby, the product belt should high a little bit or
same height with baby’s shoulder (Fig 2d).
When your baby is bigger than 13kg (about 2.5 years
old),please do not use the comfort pad. ( Fig 2e )
Use the T comfort pad for children under 9 kg. (Fig. 2f)
Securing the child in the child seat
Press adjuster button (fig 3a 1);At the same time to pull
out two shoulder strap (fig 3a 2) please don’t pull the
shoulder. Press the button on the buckle to open the
5-point harness. (FIG. 3a)
Separate shoulder straps and crotch strap; Then place
two pieces of the locking tongue and the shoulder
strap in the car two sides of the seat. (Fig 3b)
Have your child sit down in the child seat. (Fig 3c)
Align the left and right buckle tongues and insert into
the buckle until you hear a “click”.Adjust the shoulder
pads. (Fig 3d)
The shoulder belts are correctly adjusted and the straps
are not twisted. (Fig 3e)
Pull the harness adjustment strap until the shoulder
straps are tight against the child. For proper tightne -ss,
no more than one single finger should fit between the
harness straps and the child’s shoulders.(Fig 3f)
NOTE:
• The more snugly the harness fits over your child’s
body,the better your child will be protected,The
refore avoid putting thick clothes on yourunder
the belt.
• The harness straps must be positioned as low as
possible over your child’s hips.
The removal of the five-point harness system
Press the red button on the buckle to release the
shoulder straps and move them to the side. (Fig 4a.4b)
Place the two clips from under the upholstery, at the
sides. See diagram 4c.
The complete status as picture 4d shows .
3
4
IM 2086.00 ALL ABOARD bo.indd 38 8/1/19 11:18