BCS 4206, Operating Manual

Page: 47 / 151

34
mi-4
Series
4.1.2 Print Control
HEAT
—
10 (0-30)
Controls the ‘burn-time’ of the printhead.
This is the equivalent of Heat Setting on most
label software programs. See Section 2.1 for
more on print quality control.
PRINT SPEED Controls the rate of label movement during
the printing process; see Appendix C.
FEED SPEED Controls the rate of label movement between
printing areas; see Appendix C.
REVERSE SPEED Controls the rate of label movement during
backup positioning for start of print, cutting
or present distance; see Appendix C.
ROW OFFSET
—
00.00in (0-99.99)
Shifts the vertical start of print position. This
is the user setting for row adjustment.
COLUMN OFFSET
—
00.00 in (0-99.99)
Shifts the horizontal, left-justified start of
print position to the right without shifting the
Label Width termination point to the right.
This is the user setting for Column Adjust.
PRESENT DISTANCE
—
0.00 in (0-4.00)
Sets the label stop position past the start of
print. When the next label format is received,
the printer will automatically backfeed to the
start position. If a quantity of more than one
label is printed without a present sensor
enabled, or if the present distance is set to
zero, the printer will operate without
reversing.
(Continued next page)