BCS 4206, Operating Manual

Page: 30 / 151

mi-4
Series 17
3.1.2 Fan-Fold Media
n
Bring the media in through the Bottom or the Rear Media Slot.
o
Depending upon the entry point, route the media as shown below.
Rear Media Slot: route the media over the Media Hub.
Bottom Media Slot: route the media over the Media Rewind Hub.
p
Continue routing the media under the Media Idler, through the Media
Sensor and out the front of the printer.
q
Raise and slide the Media Guide over to rest lightly against the edge of the
media.
r
Ensure the Media Sensor is correctly positioned; see Section 5.0 for
details.
s
Lower the printhead by rotating the Printhead Latch to the locked position.
Close the Access Cover.
)
If you are printing with thermal transfer media, see Section 3.3 for ribbon
loading instructions.
)
If you have a thermal transfer printer but will be printing on direct thermal
labels, see Section 4.1.1 for instructions to select direct thermal media in
the Media Settings menu.