BCS 4206, Operating Manual

Page: 104 / 151

mi-4
Series 91
5.6.3 Application Update Problems
;
Note: If experiencing trouble when attempting to download the file to the
printer, try the following alternate methods:
1) Use the download procedure in Section 5.6.2.
2) Windows
®
users – try restarting the computer in MS-DOS mode.
The following is list of possible error messages when downloading:
Application Update Error Messages
Displayed Message Descriptions / Causes / Solutions
The printer detected an error during the
decompression and transfer of file data from
cache storage into the Flash memory. Confirm the
version and retry the download; however, if the
problem continues call for service.
""
The printer could not successfully erase Flash
memory. The possible cause is defective Flash
memory. Try the download again; however, if the
problem continues call for service.
"
The printer could not successfully write the
program into Flash memory. A possible cause is
defective Flash memory. Try the download again;
however, if the problem continues call for service.
"""
""
Application Firmware downloaded was not
compatible with the printer’s Main PCB (i.e.,
firmware used was for a different series model
and not supported by this boot loader version).
See Section 4.1.4 – Configuration Level.
""
""
The printer detected an error in the download. The
possible causes include:
•
An invalid or corrupted file was downloading;
try saving the file to the host and then download
again.
•
A communications error. Recheck cabling and
port setting.
""
""
Reserved for future use. If this message is
consistent, call for service.