bbraun 8717070, Service Manual

Page: 8 / 106

Important Preliminary Remarks
0 - 8 Infusomat® compact
plus
P 1.0 EN
For internal use, only
CALIBRATION OF GAUGES B. Braun calibration gauges are delivered with a calibration certif-
icate for the gauge itself. Calibration intervals are stated in this
document. Regular recalibrations of the gauge according to the
stated intervals are mandatory.
Additional recalibrations may be required in the following cases:
■
If a gauge has been repaired or modified
■ After an event which might potentially have compromised the
validity of the calibration, for example, after a gauge has been
exposed to shock, vibration, or physical damage
■ Whenever observations appear questionable or indications of
the gauge do not match the output of surrogate instruments
Service personnel are responsible for assuring regular or additional
recalibration of their test equipment at any time. Original test
equipment must be calibrated at the works of B. Braun. Further
information is available upon request.
NOTICE
The use of spare parts with a serial number or a batch number
has to be documented. Affected spare parts are specified in the
list of spare parts.
Parts with a serial number (SN) carry a sticker with the part
number and the serial number as well as a data matrix code. In
case there are several stickers on the part, the number starting
with 3452XXXX has to be used. Additionally the serial number is
on the label of the packaging.
Parts with a batch number carry the number only on the label of
the packaging (LOT).
In case a set or kit (3477XXX) contains a part with a batch num-
ber the number is on the bag containing the part.
The documentation has to be realized at least in the service re-
port (
see "Service Report"
➡
p. 11 - 2 ).