bbraun 8717070, Service Manual

Page: 37 / 106

3 Disassembly / Assembly
Infusomat® compact
plus
P 1.0 3 - 5 EN
For internal use, only
3.2 GASKET FOR RUBBER CONNECTOR Designation Ord. No.
Gasket for rubber connector CP. . . . . . . . . . . . . . . . . . . . .34522010
Screws
( see "Sets of small parts"
➡
p. 3 - 1 )
Disassembly
1. Unscrew the four screws ( Fig. 3 - 3 / Item 1 ) using a 10IP TORX
plus screwdriver.
2. Remove the gasket ( Fig. 3 - 3 / Item 2 ).
Assembly
✓
Power supply is installed in the housing, bottom part.
1. Attach the gasket with the correct orientation.
2. Tighten the screws with a torque of 0.75 Nm ± 0.1 Nm.
Fig. 3 - 3
1 Screw DELTA PT 30x9 WN 5454
2 Gasket
1
2
NOTICE
Use a new gasket whenever the gasket has been removed.