bbraun 8717070, Service Manual

Page: 17 / 106

Infusomat® compact
plus
P 1.0 1 - 1 EN
For internal use, only
1 Overview of the Device
SYSTEM OVERVIEW The compact
plus
system is a modular design of modern infusion
technology for stationary use in a rack system or for mobile use.
The key modules and their connection among each other as well as
to the peripheral devices are shown in
Fig. 1 - 1 .
All pump types, Perfusor® compact
plus
, Infusomat® compact
plus
,
Infusomat® compact
plus
P, as well as other devices of the system
are based on a modular design. Up to three pumps can be
connected together mechanically using L rails on the bottom of the
unit and grooves on the top. They can then be fastened to a drip
stand using the pole clamp.
The Station compact
plus
allows the set-up of a complete pump
system with up to 18 pumps. Up to three pumps can be installed
in every Station compact
plus
. The pumps are supplied with mains
power via built-in connectors. Infrared technology is applied to
accomplish the data transfer between the Station compact
plus
and
the pumps. The Station compact
plus
is connected with the Data
module, if integrated.
Up to four Station compact
plus
units can be set-up as a pillar with
a total of 12 pumps.
Station compact
plus
units at the same patient can be connected via
special connection cables, if the maximum number of six Station
compact
plus
units in maximum two pillars is not exceeded.
Fig. 1 - 1 System compact
plus
1 Station compact
plus
2 Infusomat® compact
plus
P
3 Perfusor® compact
plus
4 Data module compact
plus
1
2
3
4
8