Bay Networks Nautica RADIUS Reference Manual Download Page 97

Page: 97 / 130

UTORIAL

3-31

78. Close the “IPPath” window by [clicking] the OK Button. The “Account

Information” window should now be displayed.

79. [Click] the down-arrow on the right hand side of the IPX Networking

Box. The options revealed are Enabled and Disabled. Select “Disabled”.

80. [Click] the down-arrow on the right hand side of the Outgoing Calls Box.

The options revealed are Allowed and Disallowed. Select “Disallowed”.

81. Leave the (Outgoing Call) Tel Box Blank.

[Click] the down-arrow on the right hand side of the Service Box. The
options revealed are a list of all configured Quality of Service Profiles and
one called “Default”. For this example again select “SILVER”.

Note that we have used the same Quality of Service profile for both the roving

PC User and the remote LAN for simplicity in the tutorial. This need not

Summary of Contents for Nautica RADIUS



































































































































Search results

Summary of Contents for Nautica RADIUS

Reviews:

Related manuals for Nautica RADIUS

Brands by name

Popular brands

Bay Networks Nautica RADIUS, Reference Manual

Search results

Summary of Contents for Nautica RADIUS

Reviews:

Related manuals for Nautica RADIUS

Brands by name

Popular brands